|
|
 The first rescue trucks in the early 1970s typically were built on a light-duty cab chassis with two-wheel drive and gasoline engines because rescue tools and equipment were simple: chains, come-alongs and hand-powered tools. But they evolved to small, lightweight, low-duty cycle vehicles to carry equipment to aid or support an emergency incident. Rescue trucks fall under the "Special Service Fire Apparatus" portion of the standard. A minimum of 120 cubic feet of enclosed compartmentation is needed to meet the requirements. This should be an easy requirement to meet, as even the smallest bodies should have at least double the amount of this requirement. Also, there are some minor equipment requirements that will need to be considered, such as one SCBA for each seated position, but not fewer than two total, and one spare air cylinder for each breathing apparatus carried. The effort is transferred to the jaws by two levers which act by a cam system on the links that control the automatic clamping of the jaws on the wire rope. The Hand-i-Lift was developed by a technician with 35-plus years of experience in the small engine and lawnmower repair business. It''s available in 2 models: 4-3-6 for a wheel-base of 48 inches mccullochgaschainsaw wide by 60 inches long, and 5-3-7 for a 60-by-84 wheel-base. The standard lift height is 36 inches, but can be custom built to 44 inches high; the load limit is 1,500 pounds. Both models have removable panels to allow full access to the service area. The table will go from the floor to full height in 60 seconds mccullochgaschainsaw or can be stopped in between and supported on the safety chain. Constructed of all-welded steel, the Hand-i-Lift comes with a limited lifetime warranty against defects in materials or workmanship. The winch, cables and pulleys are backed by a limited 2-year warranty. The basic units with a wood deck cost $650 for the 43-6 and $740 for the 5-3-7. Delivery and installation are free within 200 miles of Holliday, Texas. Powered Tarping Systems provide a safe way to tarp loads mccullochgaschainsaw without having to climb on the back of trailers or on top of loads. The operator simply connects a tarp to the spreader bar and guides the tarp mccullochgaschainsaw along the length of the trailer via a hand-held pendant control and powered winch system. The systems can be customized to fit a specific application and are available in a variety of materials. Optional platform and stairs are available for safe access to the side of trailers. Carbis Inc., Florence, S.C. A well-intentioned but hopelessly naive friend once told me that if Linda rubbed a little Goop or other good hand cleaner on the spots on my overalls, they''d come out much more easily in the wash. Looking for a chainsaw for sale? We have tons of chainsaws to choose from right here! Not only do we have a huge chainsaw selection for you to choose from, our chainsaws are off the chain as far as discounts. We have a huge selection of cheap chainsaws.
|