|
|
 This article is the story of our experiences developing and running the iWRS AI control system.The Early YearsBy 1995, the AI controls team had been working with several groups in the Crew and Thermal Systems Division (CTSD), building Al control systems in support of CTSD''s investigations in advanced life support (ALS). remingtonmightymitechainsaw In 1995, they put a man in an airlock linked to a 10-foot-diameter chamber full of wheat (Laifook and Ambrose 1997). For 15 days, the man lived, worked, and exercised in the chamber as the wheat crop took in his carbon dioxide and produced oxygen for him. The control system--our first for ALS--monitored and provided caution and warnings for the climate and nutrient environment of the wheat crop. CPU systems are extremely stable and can be very energy efficient depending on duty cycle especially when combined with parallel LS circuits. Here, the duty cycle of a telehandler makes this very attractive. They feature a simple low-cost open center main valve converted to closed center with tailored spools and offer very good metering to minimize interference when multifunctioning.In the accompanying example, two separate valves art" used to control the functions. A 40 gpm valve is used for the boom up/down and retract/extend. A smaller 20 gpm valve is selected for tilt, frame level, left/right outriggers and auxiliary. An integrated circuit is affixed to the lower flow valve that provides load sense for the brakes, priority steering and pilot pressure. When the lift or telescopic function is activated the orifice is closed remingtonmightymitechainsaw off and the pump goes to remingtonmightymitechainsaw compensator pressure. It is also true for the tilt, frame level, outriggers and auxiliary functions. This is accomplished by sending the load sense signal through open center core of the 40 gpm valve on to the 20 gpm valve via power beyond. Since the remingtonmightymitechainsaw pump in this example supplies only the flow requested any combination of valves is possible. DERRICK: 160''; 1,000,000 lb hook load.BOP SYSTEM: Hydril 120" 2,000-psi annular; HydrilGK 13 5/8", 5,000 psi annular; One double, one singleCameron U 13 5/8", 10,000 psi rams.CRANES: One SeaKing Series 62, 46 t @ 30''w/100''boom; One Link Belt ABS-218, 31 t @ 30'' w/90'' boom.TOWING REQUIREMENTS: 12,000 hp.OTHER DATA: Cascading shale shaker system.WORK AREA: Gulf of Mexico.OCEAN SUMMITRIG remingtonmightymitechainsaw DESIGN: Modified Levingston Class IIICONSTRUCTION: 1972; Upgrade and cantilever conversion in 1991.CRANES: One Sea King Series 62, 46 t @ 30'' Looking for a chainsaw for sale? We have tons of chainsaws to choose from right here! Not only do we have a huge chainsaw selection for you to choose from, our chainsaws are off the chain as far as discounts. We have a huge selection of cheap chainsaws.
|